MANUALS
On this page you’ll find instructions for the different products.
Please select the type of item you purchased and start the application. Before you know it your room make-over is finished.
Non-woven murals
In lanes
MuralTex murals
In one piece
Peel&Stick circles
Up to 140 cm
MuralTex circles
from 160 cm
1) Preparation
- Necessary/useful tools: glue suitable for non-woven wallpaper, block brush, wallpaper spatula
- Ensure the wall / surface is completely flat, clean, dry and smooth.
- MuralTex wall circles are not suitable for textured walls. If you want to apply to a textured wall, it is recommended to smooth out the part your want to apply the product on.
2) Application
- Prepare the wallpaper glue according to the specifications on the packaging of the glue.
- Apply a generous amount of glue to the back of the circle (not to the wall) with a block brush. Ensure the edges are well-covered with glue.
- Apply the circle from top to bottom on the wall and smooth it out it with a spatula, working from the center to the edges.
- Use the spatula or a cloth to smooth out any air bubbles.
3) Finishing
- Once the entire circle is applied, press it again from top to bottom with a spatula.
- Check the edges and press them firmly to ensure the circle is securely attached.