MANUALS

On this page you’ll find instructions for the different products.
Please select the type of item you purchased and start the application. Before you know it your room make-over is finished.

Non-woven murals

In lanes

MuralTex murals

In one piece

Peel&Stick circles

Up to 140 cm

MuralTex circles

from 160 cm

1) Preparation

  • Necessary tools: wallpaper spatula
  • Ensure the wall / surface is completely flat, clean, dry and smooth.
  • This product can be applied to glass, plastic, and wooden surfaces. For wood, ensure it is splinter-free and flat. This product is not suitable for textured walls. If you want to apply to a textured wall, smooth out the part your want to apply the product on by sanding it or applying plaster.

2) Application

  • Peel off about 20% of the backing, starting from the top.
  • Stick the first part to the wall and smooth it out it with a spatula, working from the center to the edges.
  • Continu to peel and stick, working from top to bottom until the entire circle is applied on the wall.
  • Use the spatula or a cloth to smooth out any air bubbles.

3) Finishing

  • Once the entire circle is applied, press it again from top to bottom with a spatula.
  • Check the edges and press them firmly to ensure the circle is securely stuck to the wall.